Name: GEELANG KUDA-100X PusherStyle 3S BWhoop GL1204 KV5000 Brushless Motor 5.8G VTX 400MW Support for Naked Runcam Thumb Action Cam PNP NO Receiver
SKU: O369086049
Availability: InStock

Description Reviews (0)

GEELANG KUDA-100 X WHOOP3FPV Standard edition

Brand Name:GEELANG

Mode Name: KUDA-100X whoop

Applicable playersFPV Getting Started Exercises FPV Professional manipulationFpv video mount flight.

Wheelbase: 99mm

Size:148mm * 148mm * 35mm

Weight119g5.8GVTX

Recommended battery3S 500mAh-850mah lipolihvCruise flight time can reach 4-11minutes.

Support installationSupport for installing thumb action cameras

Spare parts specifications:

GL1204KV5000 Motor	Motor KV5000 Configu-ration:9N12P Stator Diamter:12mm Stator Length:4mm Shaft Diameter:1.5mm WindingSpecifications:220 Class Multiple oxygen-free copper Weight(g):5.3g No.of Cells(Lipo)3S
F4 AIO20APROESC	CPU:STM32F411CEU6(100MHz) IMU: BMP-270 (SPIconnection) Firmware: F411 OSD:Built-inOSD (STM32controlstheOSDchipviaSPI) Data storage:8m black box ProgrammableLEDsuchasWS2812: Support Built-incurrentsensor Reservedbuzzerinterface MountingHole: 25.5×25.5mm Weight: 8g -SupportFrsky/Flysky/Futaba/DSMX/TBS/ELRS CrossfireReceiver
Onboard 20A BL_S 4in1 ESC	Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 2-6S LiPo/LiPo HV (7.4v/26v) Current: 20A continuous peak 25A (5 seconds) Support BLHeliSuite programmable Factory firmware: G_H_30_REV Default protocol: DSHOT300
propeller	Gemfan 2540 Cinewhoop props Material: PC Weight: 0.91g Pitch: 2.5 inches Center hole diameter: 1.5mm 3 holes
Battery recommended	Species : lipolipoHV Capacity:500mah-750mah-850mah Voltage:11.1V Continuous Discharge Rate: 95C Instantaneous discharge rate: 110C Connector: xt30
5.8G VTX	Power switching: four gears (25MW, 100MW, 200MW400MW) Frequency: 40CH Input voltage: 11.1V-14.8V Current consumption: 580mA (type) Frequency: 5.8GHz 5bands 40 channels belt Smartaudio ready (Frsky EU-LBT and DSMX versions are not compatible) Weight: 6.0g
CADDX ANTCamera	Model: ANT Image Sensor: 1/2CMOS Horizontal Resolution: 1200TVL Lens: 2.1mm(M8) FOV 155(4:3) Signal System: NTSC / PAL S/N Ratio: >50dB Min. Illumination: [email protected] Current :210mA@5V-36V Housing Material: ABS Net Weight: 4g Dimensions: L14mmW14mmH8mm

Include

1 x KUDA-100X WHOOP(5.8GVTX)

1XReceiverAC900RX or Frsky XM +\ EU XM+ RX or Flysky RXor TBS RX or ELRS2.4TEP RX or No PNP NO RX

1 x Gemfan2540 2.52cw +2ccwpropeller

1 x Screwdriver tool

Reviews

There are no reviews yet.

Be the first to review “GEELANG KUDA-100X PusherStyle 3S BWhoop GL1204 KV5000 Brushless Motor 5.8G VTX 400MW Support for Naked Runcam Thumb Action Cam PNP NO Receiver”

GEELANG KUDA-100X PusherStyle 3S BWhoop GL1204 KV5000 Brushless Motor 5.8G VTX 400MW Support for Naked Runcam Thumb Action Cam PNP NO Receiver

GEELANG KUDA-100 X WHOOP3FPV Standard edition

Brand Name:GEELANG

Mode Name: KUDA-100X whoop

Applicable playersFPV Getting Started Exercises FPV Professional manipulationFpv video mount flight.

Wheelbase: 99mm

Size:148mm * 148mm * 35mm

Weight119g5.8GVTX

Recommended battery3S 500mAh-850mah lipolihvCruise flight time can reach 4-11minutes.

Support installationSupport for installing thumb action cameras

Spare parts specifications:

GL1204KV5000 Motor

Motor KV5000

Configu-ration:9N12P

Stator Diamter:12mm

Stator Length:4mm

Shaft Diameter:1.5mm

WindingSpecifications:220 Class Multiple oxygen-free copper

Weight(g):5.3g

No.of Cells(Lipo)3S

F4 AIO20APROESC

CPU:STM32F411CEU6(100MHz)

IMU: BMP-270 (SPIconnection)

Firmware: F411

OSD:Built-inOSD (STM32controlstheOSDchipviaSPI)

Data storage:8m black box

ProgrammableLEDsuchasWS2812: Support

Built-incurrentsensor

Reservedbuzzerinterface

MountingHole: 25.5×25.5mm

Weight: 8g

-SupportFrsky/Flysky/Futaba/DSMX/TBS/ELRS

CrossfireReceiver

Onboard 20A BL_S 4in1 ESC

Onboard 4in1 ESC MCU upgraded to EFM8BB21

Power supply: 2-6S LiPo/LiPo HV (7.4v/26v)

Current: 20A continuous peak 25A (5 seconds)

Support BLHeliSuite programmable

Factory firmware: G_H_30_REV

Default protocol: DSHOT300

propeller

Gemfan 2540 Cinewhoop props

Material: PC

Weight: 0.91g

Pitch: 2.5 inches

Center hole diameter: 1.5mm 3 holes

Battery recommended

Species : lipolipoHV

Capacity:500mah-750mah-850mah

Voltage:11.1V

Continuous Discharge Rate: 95C

Instantaneous discharge rate: 110C

Connector: xt30

5.8G VTX

Power switching: four gears (25MW, 100MW, 200MW400MW)

Frequency: 40CH

Input voltage: 11.1V-14.8V

Current consumption: 580mA (type)

Frequency: 5.8GHz 5bands 40 channels

belt

Smartaudio ready (Frsky EU-LBT and DSMX versions are not compatible)

Weight: 6.0g

CADDX ANTCamera

Model: ANT

Image Sensor: 1/2CMOS

Horizontal Resolution: 1200TVL

Lens: 2.1mm(M8) FOV 155(4:3)

Signal System: NTSC / PAL

S/N Ratio: >50dB

Min. Illumination: [email protected]

Current :210mA@5V-36V

Housing Material: ABS

Net Weight: 4g

Dimensions: L14mm*W14mm*H8mm