The Happymodel Mobula8 O4 micro FPV whoop comes out now . It comes with DJI O4 air unit which would provide excellent and unbelievable FPV footage. We added FOV Extender for the O4 camera on Mobula8, this would be a great improvement for FPV flying.
Features:
EquipmentwithDJIO4airunitandexternalFOVExtender
NDFiltersready
2SbatterysupportPowerfulandSmoothfreestyleflying
UARTExpressLRSreceiversupportstablecontrollink
Recommenduse2S550Mahbattery
Specifications:
BrandName:Happymodel
ItemName:Mobula8O42S85mmDigitalHDMicroFPVwhoop
Wheelbase:85mm
Size:120mm*120mm*53mm
Weight:50g
Option:
With DJIO4airunitpre-assembledversion
Package includes:
Item Name
|
Qty
|
Happymodel Mobula8 Frame
|
1
|
CrazyF405HD ELRS flight controller firmware target:BETAFLIGHTF4
|
1
|
EX1103 KV11000 brushless motor
|
4
|
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw)
|
1
|
With DJI O4 Air unit
|
1
|
FOV Extender for O4 camera
|
1
|
Angle-adjustable Canopy
|
1
|
Screw driver
|
1
|
Spare parts specifications:
Motor
|
Mode: EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:1.5mm
Motor Dimension(Dia.*Len):13.5mm*15.5mm
Weight(g):3.8g
No.of Cells(Lipo):1-2S
|
Propellers
|
Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm
|
Flight controller
|
MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
GYRO Sensor: BMI270 (SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Serial ExpressLRS 2.4GBuilt-in BMP280 BarometerBuilt-in 8MBp blackbox
Built-in voltage meter sensor , voltage meter scale 110
Built-in current meter sensor , current meter scale 470
|
Onboard 4in1 ESC
|
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeli_S Bluejay firmware
Factory firmware: Bluejay ESC V0.19Firmware target: Z-H-30
Default protocol: DSHOT300
|
Onboard UART ExpressLRS 2.4GHz Receiver
|
Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RFFrequency: 2.4GHz
Antenna: enameled copper wire 31mm length
TelemetryoutputPower:<12dBm
Default firmware version: ExpressLRS V3.0.1
Firmware target: HappyModel EP 2400 RX
Could update firmware via ExpressLRS configurator
|
for DJI O4 Air Unit
|
Weight:
Air Unit (camera module included): Approx. 8.2 g
Transmission Module: 30306 mm (LWH)
Camera Module: 13.4412.3616.50 mm (LWH)
Camera Cable Length: 50mm
Coaxial Cable: 50 mm
3-in-1 Cable: 50 mm
Operating Frequency:
5.170-5.250 GHz
5.725-5.850 GHz
Operating frequency varies by region. Refer to local regulations.
Transmitter Power (EIRP):
5.1 GHz: <23 dBm (CE)
5.8 GHz:
<30 dBm (FCC)
<14 dBm (CE)
<30 dBm (SRRC)
Live View Quality: 1080p at 30/50/60/100fps
|
FOV Extender for O4 Camera
|
Weight: only 3.2gram
Built-in widening lens
FOV angle up to 150 degree
3d printed Camera holder
Include UV filter, ND8 filter, ND16 filter
|
If you want to use DJI FPV Remote controller, Please first reflash betaflight firmware add add SBUS protocol support when load firmware online. And then please import defaulct factor dump file to CLI command , then change betaflight settings like following picture,no need do any hardware modification to the flight controller:
window.adminAccountId=230538290;
Reviews
There are no reviews yet.